Toro eTimeCutter eMR4275 Bedienerhandbuch Seite 58

Leveling the Mower Deck (continued)
4. Place 2 blocks, each having a thickness of 7.3 cm (2-7/8 inches), under each side of the
rear edge of the cutting deck skirt.
5. Adjust the side-to-side level as necessary:
A. Remove the hairpin cotter and washer from the left lower lift-arm pin.
B. Rotate the height-of-cut plate to a different hole so that it supports the weight of the
mower deck after you install the plate.
C. Install the washer and hairpin cotter.
Maintenance: Mower-Deck Maintenance
G448684
G448681
Page 5–12 3445-793 A