Toro eTimeCutter eMR4275 Bedienerhandbuch Seite 46

Hauling the Machine (continued)
4. Back the machine up the ramp.
5. Shut off the machine, remove the key, and
engage the parking brake.
6. Tie down the machine using straps, chains,
cable, or ropes. Refer to local regulations for
tie-down requirements.
Note:
that it does not open during transport.
Unloading the Machine
1. Lower the ramp, ensuring that the angle
between the ramp and the ground does not
exceed 15 degrees.
2. Drive the machine forward down the ramp.
Operation: After Operation
Ensure to tie down the battery box so
G414592
G027708s
G414593
Page 4–21 3445-793 A