Main Characteristics; Technical Characteristics - Radson Tempco CP W Bedienungsanleitung

All manuals and user guides at all-guides.com

MAIN CHARACTERISTICS

Flush Mounting version, standard fixing with 60mm axes.
Large graphic display with backlight
Easy use interface (5 keys with scroll menu).
Several languages available
Graphic view for program with icons to help the creation.
Available for Heating & cooling installations (with reversible heat
pump)
Residual humidity supervision
Possibility to regulate on:
- Air sensor only
- Floor sensor only
- Air & Floor combined with different possibilities.
Temporary override function (2H)
Silent (Triac output)
Sensors Auto checks (Short circuit and breaks)
Permanent memory storage

TECHNICAL CHARACTERISTICS

Measured temperature
precision
Operating temperature
Setting temperature range
Regulation
characteristics
Electrical Protection
Power Supply
Product consumption:
Full load (without actuators)
standby
Outputs:
Actuator
Pilot Zone A&B
Software version
0.1°C
0°C - 50°C
5°C - 35°C by 0.5°C step
- Hysteresis (ON/OFF)
- Proportional Integral (PWM)
Class II - IP30
Done by the MASTER UFH
230V +/- 10% 50Hz
~ 3,5W
~ 1.8W
TRIAC
230VAC 75W Max (4 actuators)
2 TRIACS 230VAC.
With a Maximum of 6 thermostats
per zones.
Displayed during the init (after
power supplying)
Version 1.x x
7