Radson Tempco CP W Bedienungsanleitung Seite 32

All manuals and user guides at all-guides.com
To change the installation, move the navigation cursor in front of
the desired line and Press (Ok) to valid "".
Heating:
- To be use when your house is only equipped with heating system
only.
Cooling:
- To be use when your house is only equipped with cooling system
only.
Reversible => Heating & Cooling:
- To be use when your house is only equipped with heating and
cooling systems.
- Two possibilities must be appears:
Manual change
The working mode heating or cooling will be done by the end user
on the special menu on the programmer, in the main menu. See
the next part "Heat & Cool Mode" for more information.
Automatic change (contact)
The working mode heating or cooling will be done by the
connecting box "H&C module".
Generally use when reversible heat pump are installed.
4.4 Display
On this submenu you can adjust the contrast and the luminous
intensity of the backlight.
Installation type
Heating
Cooling

Reversible
Manual
Automatic (contact)
Display
0%
32


50%