Hauff-Technik MIS100/VT63-ND Montageanweisung Seite 27

Single building entry MIS 100/VT63-ND
for wall thicknesses of 240 to 600 mm with option for pebbles
9 Required tool and auxiliaries
In addition to standard tools, the following tools and auxiliaries are required for the correct installation
of the Single building entry MIS100/VT63-ND:
– Drill e.g. HILTI DD200 with drill bit or drilling tool for holes Ø 99 -103 mm
– Cartridge gun for 2-component resin (available from Hauff-Technik GmbH & Co.KG)
– Lubricant
– Quick tensioning device MIS 100/VT63-SVS, re-usable (Hauff model)
– Spacer clamp
– Ponal PP6/PP12 cartridge gun
– Side cutter
– Angled screwdriver
– Reversible ratchet ¼ inch
– Extension ¼ inch 150 mm
– Various socket wrenches
– Quick deburrer
– Centring sleeve half
The required tools are contained in an installation
case (MK MIS 100/VT63-ND, Art. No. 2900300495)
which can be ordered separately through Hauff-Tech-
nik. Get in touch with us on 07322/1333-0 or office@
hauff-technik.de.
Art. Nr.: 5090032132 Rev.: 01/2023-08-14
EN
27