Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Single building entry MIS 100/VT63-ND
for wall thicknesses of 240 to 600 mm with option for pebbles
• In the event of contact with eyes, rinse thoroughly with water and consult doctor
• In the event of contact with skin, wash off immediately with plenty of water and soap
• Wear protective gloves
• In the event of accident or sickness, consult a doctor (show the label of the resin cartridge if
possible).
Processing instructions:
• Processing temperature: +5°C to +30°C; optimum: +15°C to +25°C
The product falls within the scope of applicability of Regulation (EC) 1907/2006 (REACH), Annex
XVII, No. 74, Item 1(b). Effective 24 August 2023, appropriate training must be conducted prior to
any industrial or commercial application. Further information at: https://www.feica.eu/PUinfo
4�1 Explanation of symbols
1
Work stages
Effect/result of a work step
1
Reference numerals in drawings
4�2 Warnings
Warnings are indicated in these assembly instruction by means of symbols. The warnings are preceded
by signal words which show the extent of the hazard. It is imperative to observe the warnings and
act with care so as to avoid accidents, bodily harm and damage.
DANGER!
... indicates a direct hazard which can result in death or severe injury if not avoided.
WARNING!
... indicates a potential hazard which can result in death or severe injury if not avoided.
CAUTION!
... indicates a potential hazard which can result in negligent or slight injury if not
avoided.
NOTE!
... indicates a potential hazard which can result in damage to property or the
environment if not avoided.
Art. Nr.: 5090032132
Rev.: 01/2023-08-14
EN
23
Werbung
