cecotec READYWARM 4000 THERMAL CERAMIC CONNECTED Bedienungsanleitung Seite 27

P3 (Programme for independent days)
1. When P3 is selected, press the OK button once. The P3 symbol and the first time symbol
(icon 13) will blink.
2. Press the mode button to chose the each hour's mode and use (+) and (-) to move the
blinking hour symbol (icon 14) until the 24-hour mode setting is completed.
3.
Press the OK button to confirm the 24-hour setting, and switch from the Monday
programme to the Tuesday programme.
4. When the 7 day setting is complete, press the OK button to confirm and exit.
P1: Day programme
Single day programme: choose from Monday to Sunday.
Fig.9
P2: Weekdays and weekends programme
Programme from Monday to Friday, and from Saturday to Sunday.
Weekdays
Fig.10
Weekend
Fig.11
P3: Programme for independent days
- A different programme can be set for each day of the week.
- The same programme is set from Monday to Friday and from Saturday to Sunday by
default.
Weekdays
Fig.12
Weekend
Fig.13
Open window function
- Press the On/off open window button and Wi-Fi function to turn the Open window function
on. When the symbol appears on the display, it will indicate that the function is activated.
- When the function is activated, and temperature decreases rapidly by 2 ºC in less than 2
minutes, the appliance will stop operating and the Open window symbol will blink.
- Press the On/off open window button and the Wi-Fi function, the appliance will resume
operation under the preset programme. The Open window symbol will stop blinking.
Display lock
- If the appliance is not used during 1 minute, the display will lock automatically.
- Press (+) and (-) simultaneously to unlock the display.
READYWARM 4000 / 6000 / 8000 THERMAL CERAMIC CONNECTED
ENGLISH
27