cecotec READYWARM 4000 THERMAL CERAMIC CONNECTED Bedienungsanleitung Seite 24

ENGLISH
1. BEFORE USE
- Take the product out of the box and remove all packaging materials.
- Make sure all parts and components are included and in good conditions. If any sign of
visible damage is observed, contact immediately with our official Technical Support
Service.
2. PRODUCT ASSEMBLY
Wall assembly
1. Before installing it, make sure the appliance is placed at a minimum safety distance of 20
cm from any obstacle (walls, shelves, floor...).
Fig.2
Fig.3
2. Drill 2 holes on the wall with specific distance between them according to the model:
MODEL L (mm)
05816 200
05817 300
05818 500
Fig.4
Warning
Make sure to keep the safety distance in the above drawings.
1. Place the fixing tube in the holes.
2. Attach the hook to the wall with the screws.
3. Hang the electric radiator from the top hook.
4. Assemble the lower hook in between both flaps of the lower part of the radiator.
5.
Attach the lower hook with screws.
Warning
Before using the heater, make sure it is properly mounted to the wall.
READYWARM 4000 / 6000 / 8000 THERMAL CERAMIC CONNECTED
24