Cameo LEYA 2000 RGB Bedienungsanleitung Seite 15

Thanks to its integrated rubber feet, the show laser can be positioned in a suitable location on
a flat surface. Truss mounting is possible with a suitable truss clamp, which is attached to the
mounting bracket (A). Truss clamps are available as an option. Ensure firm connections and
secure the show laser with a suitable safety rope to the safety eyelet provided on the back of the
device. Use the clamping levers (B) to adjust the radiation direction on a vertical plane.
B
OPTIONAL ACCESSORIES
CARE, MAINTENANCE AND REPAIR
In order to ensure the long-term, proper functioning of the device, it must be regularly cleaned
and, if necessary, serviced. The servicing requirement depends on the intensity of use and the
environment in which it is used.
We recommend a visual inspection before each operation. Furthermore, we recommend carrying
out all the applicable service measures specified below once every 500 operating hours or, in
the case of a lower intensity of use, at the latest after one year. Warranty claims may be limited
should defects result from inadequate service and maintenance.
A
CLLEKSXLR
Emergency cut-off switch with 3-pin XLR socket
B
15