Cameo LEYA 2000 RGB Bedienungsanleitung Seite 9

HAZARD! IMPORTANT NOTES REGARDING LASER PRODUCTS!
1. This product has been developed for professional use in the field of event technology and is not
suitable for use as domestic lighting.
2. This device contains a laser of the laser class marked on the housing and in the technical spec-
ifications according to EN 60825-1 classification.
3. DO NOT look directly into the laser beam. Risk of injury and blinding!
4. Do not expose to the laser beam. The laser beam can cause burns.
5. In this context, exercise increased caution when using optical instruments (e.g. magnifying
glass, camera, binoculars etc.)!
6. If installed or used incorrectly, laser radiation can be a fire and explosion hazard. Therefore,
commissioning may only be carried out by trained specialist personnel.
7. In some countries, the installation or operation of lasers is subject to authorisation. Please
contact the relevant authority.
8. Appointing a laser safety officer for commissioning is always advisable and even mandatory
in some countries. Please observe your country-specific safety regulations and guidelines for
operating the laser device.
9. The safety distances between the device and the public required at the place of operation and
the maximum permissible exposure (MPE) values must always be determined by trained spe-
cialist personnel and compliance with them must be ensured (MPE limits are country-specific).
10. Even if the laser diode does not appear to be lit, radiation that is harmful to the eye may be
emitted. Therefore, always disconnect the device from the mains at all poles when it is not in
use.
11. In order to ensure the device cannot be operated by unauthorised persons, lock the switch
and remove the key!
12. If the device has an interlock connection (from laser class 3B), it must be installed in such a
way that an emergency shutdown is possible at any time.
13. Before operating the device, the laser emission window must be checked for foreign ob-
jects (dust, dirt, nicotine deposits etc.), condensation, droplets of liquid and damage such as
scratches and cracks. If the window is not in perfect condition, laser beams could be deflected
in an uncontrolled manner. If this is the case, the show laser must not be used. Clean the laser
emission window regularly and in the event of damage, have it replaced by an authorised ser-
vice centre. The laser emission window must be in perfect condition to ensure safe operation of
the show laser.
NOTES ON PORTABLE INDOOR DEVICES
1. Temporary operation! Event equipment is generally only designed for
temporary operation.
2. Continuous operation or permanent installation can impair the functioning of the
device and cause premature ageing.
9