Klarstein HARRISON Bedienungsanleitung Seite 45

CLEANING AND CARE
• Switch off the device immediately and pull the plug out of the socket. Let the
device cool down completely before cleaning.
• Do not immerse the power cord or the plug in water or other liquids. Do not
pour water or other liquids over the device.
• Use a vacuum to remove dust and lint.
• Wipe the outside with a dry cloth.
• Remove stains with a damp cloth.
• Do not use detergents, abrasives or polishes as these can damage the surface.
TROUBLESHOOTING
If the device does not warm up or turn on, check the following:
• Check whether the power supply in the house or the main fuse is working or
not.
• Check whether the power cord is plugged into an outlet or not.
• Check whether the unit is switched on or not.
If the device still is not working after this check, please contact the
manufacturer's customer service. All repairs must be performed by authorised
personnel. Manual changes to the device by unauthorised persons will void the
warranty.
Error codes
Code Possible cause
Er The temperature sensor is
broken.
Er The temperature sensor has
been short-circuited.
Solution
Have the sensor replaced by a
specialist company.
Have the sensor replaced by a
specialist company.
EN
45