Werbung
Verfügbare Sprachen
Verfügbare Sprachen
To charge the battery
CAUTION:
voltage is correct for the charger, refer to
Technical data on page 15 .
1. Connect the battery charger to a power outlet. The
green LED and the red LED flash 1 time.
2. Remove the battery from the product. Refer to
remove the battery from the product on page 11 .
3. Connect the battery to the battery charger.
Note:
The battery locks into position with a click
and the green LED flashes.
4. Remove the battery from the battery charger when
the battery is fully charged, refer to
LEDs on page 7 . Push the release button to
remove the battery.
5. Pull the power plug to disconnect the battery charger
from the power outlet. Do not pull the power cord.
1721 - 001 - 13.03.2023
Make sure that the AC
To
Battery charger
6. Install the battery on the product. Refer to
the battery on the product on page 7 .
Battery charger LEDs
A
B
LEDs
Green light flashes. (A)
Green light is on. (A)
Red light flashes. (B)
Red light is on. (B)
To install the battery on the product
•
Push the battery into the battery slot on the product.
The battery locks into position with a click.
To install
Battery status
The battery charges.
The battery is fully charg-
ed.
The battery is damaged.
Troubleshooting
Refer to
on page 12 .
The battery temperature is
Trouble-
too high. Refer to
shooting on page 12 .
7
Werbung
