Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Make sure that the battery charger is not covered.
Pull out the plug to the battery charger if there is
smoke or fire.
•
Only charge the battery indoors in a location with
good airflow and away from sunlight. Do not charge
the battery outdoors. Do not charge the battery in
wet conditions.
•
Only use the battery charger where the temperature
is between 0 °C and 45 °C/32 °F and 113 °F. Use
the charger in an environment which has a good
airflow, dry and free from dust.
•
Do not put objects into the air slots of the battery
charger.
•
Do not connect the battery charger terminals to
metal objects as this can short circuit the battery
charger.
•
Do not charge non-rechargeable batteries in the
battery charger or use them in the machine.
•
Use approved mains sockets that are not damaged.
Safety instructions for maintenance
WARNING:
instructions that follow before you use the
product.
Introduction
WARNING:
safety chapter before you use the product.
®
Bluetooth
wireless technology
Products with built-in Bluetooth
can connect to mobile devices and enables additional
functions from Husqvarna Connect.
Bluetooth
The symbol for
on when your mobile device is connected to the product.
To use embedded connectivity with
fleet
Note:
This part is applicable only for products
supplied with embedded connectivity.
Note:
Radio transmission by the Bluetooth
will be enabled on the first time of connection to a
battery, and stay on after that.
6
Read the warning
Read and understand the
®
wireless technology
®
wireless technology comes
®
function
•
If the maintenance is not done correctly and
regularly, the risk of injury and damage to the
product increases.
•
Use personal protective equipment. Refer to
Personal protective equipment on page 5 .
•
Clean the product to remove dangerous material
before you do the maintenance.
•
Do not do modifications to the product. Modifications
that are not approved by the manufacturer can
cause serious injury or death.
•
Always use original accessories and spare parts.
Accessories and spare parts that are not approved
by the manufacturer, can cause serious injury or
death.
•
Replace damaged, worn or broken parts.
•
Only do the maintenance as given in this operator's
manual. Let an approved service agent do all other
servicing.
Operation
1. Download the Husqvarna Fleet Services iOS or
Android app Husqvarna Fleet Services.
2. Go to Husqvarna Fleet Services website https://
fleetservices.husqvarna.com for more information.
To do a check of the battery
•
Push the button (A), to do a check of the battery
status.
A
•
If the lights are on (B), the battery fully is
charged.
•
If the lights are off (C), it is necessary to charge
the battery. Refer to
page 7 .
•
Make sure that the battery is correctly installed
before you start the product. Refer to
battery on the product on page 7 .
B
C
To charge the battery on
To install the
1721 - 001 - 13.03.2023
Werbung
