Adjusting the salt dosage
The water softener must be adjusted manually according to the
hardness of the water in your region.
• Open the door and switch on the appliance.
• Within 60 seconds after turning on the appliance, press and
hold the program button
the water softener setting mode.
The Salt indicator will light up periodically.
• Press the program button
corresponding to your water hardness appears on the display
(sequence: H1→H2→H3→H4→H5→H6; see table)
• Press the on/off button
Water hardness
°dH (D)
°fH (F)
0 - 5
0 - 9
6 - 11
10 - 20
12 - 17
21 - 30
18 - 22
31 - 40
23 - 34
41 - 60
35 - 55
61 - 98
• 1°dH=1.25°Clarke=1.78 °fH=0.178mmol/l
• Factory setting: H3
for more than 5 seconds to enter
repeatedly until the dosage setting
to confi rm the setting.
°Clarke
Mmol/l
(GB)
0 - 6
0 - 0.94
7 - 14
1.0 - 2.0
15 - 21
2.1 - 3.0
22 - 28
3.1 - 4.0
29 - 42
4.1 - 6.0
43 - 69
6.1 - 9.8
Using the Dishwasher
Dosage setting
(indicated by pro-
gramme indicators)
H1 (
)
H2 (
)
H3 (
/
)
H4 (
)
H5 (
/
)
H6 (
/
)
Salt
consump-
tion
0
9
12
20
30
60
19