Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation
To adjust the foot heights individually, proceed as follows:
• First adjust the respective height of the two front feet
by screwing them out by hand or with a fl at screwdriver
to the desired height (1).
• Check that the appliance is correctly positioned.
• Then adjust the height of the rear foot from the front
of the appliance by turning the adjusting screw in the
middle of the dishwasher base with a Phillips screwdriver
or an 8 mm socket spanner (2).
Attention!
!
Do not move the appliance after adjusting the rear foot.
This can be damaged e.g. when pushed over bumps.
54
1
2
1
2
Werbung
