Herunterladen Diese Seite drucken

KKT KOLBE DW452VI Benutzerhandbuch Seite 115

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

6.4 Levelling and height adjustment of the dishwasher /
adjustment of the levelling feet
The dishwasher must be level to be able to guarantee
a proper wash performance and dish rack operation.
• Check the horizontal alignment of the appliance
from side to side and from front to back
by placing a spirit level crosswise and lengthwise
on the upper edges of the appliance, or at the bottom
of the rinse chamber as shown in the illustration.
• If this is not the case, level the dishwasher horizontally
by adjusting the heights of the three levelling feet
individually, as described in the following section.
Height adjustment of the levelling feet
Attention!
!
To avoid damage , when adjusting the foot heights,
make sure that the appliance does not tip over
and that the angle of inclination of the appliance
does not exceed 2°.
In the bottom of the dishwasher 3 levelling feet are
integrated; two on the left and right at the front
and one in the middle at the back.
These are completely screwed in on delivery
and can can be turned out individually to a maximum
of 50 mm to adjust the height of the appliance or
to level the dishwasher.
Installation
53

Werbung

loading