6.5 Mounting the door panel
To attach the door panel to the front of the appliance door,
proceed as follows:
• Attach the supplied mounting brackets to the back of the door panel
and place them in the corresponding slot on the front of the applian-
ce door (1).
• Remove the short screws from the appliance door (2/A),
replace them with the long screws supplied (B)
and connect the panel fi rmly to the door by tightening the screws (3).
1
Dimensions of the door panel:
W 439 ± 1 mm × H 720 ± 1 mm
A
B
2
Installation
3
55