Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Filling / Refi lling the rinse aid dispenser
• Open the rinse aid reservoir cap
by lifting up the handle (1).
• Pour the rinse aid into the dispenser (2),
being careful not to overfi ll it.
• Close the cap again (3).
1
Setting the rinse aid dosage
• Switch on the appliance.
• Within 60 seconds after switching on, press the program but-
ton
for more than 5 seconds and then press the start time
preselection button
mode.
The rinse aid indicator
• Press the program button
ting is displayed according to your usage habits (sequence:
D1→D2→D3→D4→D5→D1; the higher the number, the higher the
rinse dose).
• Wait 5 seconds or press the on/off button
setting.
2
to start the rinse aid dosing setting
fl ashes at a frequency of 1 Hz.
repeatedly until the desired set-
Using the Dishwasher
3
to confi rm the
23
Werbung
