Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.3 Spray arms
Hard water chemicals can clog the nozzles of the
spray arms and block the bearings.
It is therefore necessary to clean the spray arms
regularly.
Removing and cleaning the spray arms
• To remove the upper spray arm,
hold the nut in the center still and rotate the spray arm
counterclockwise.
• To remove the lower spray arm, pull out the spray arm
upwards.
• Wash the arms in soapy and warm water and
use a soft brush to clean the nozzles and remove
any foreign bodies from them.
• Replace them after cleaning them thoroughly.
Cleaning and Maintenance
41
Werbung
