Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation
Connecting to the water drain
• Insert the drain hose into a drain pipe with a minimum diameter of
4 cm (A) or connect it to the sink siphon (B).
Doing this, observe the following specifi cations:
• The drain hose must be mounted correctly and fi xed
and must not be kinked or squeezed.
• The drain connection must not be higher than 1000 mm
above the dishwasher's installation surface.
• The free end of the hose must not be immersed in water
• to avoid the back fl ow of it.
• If an extension of the drain hose is necessary, use a similar drain
hose with a maximum length of 4 meters, otherwise the cleaning
effect of the dishwasher may be impaired.
1
2
50
B
5
3
4
6
A
Ø40mm
1
Dishwasher
rear side
2
Power supply
3
Water inlet
4
Water drain
5
Drain hose
6
Workspace
Werbung
