Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.5 Mounting the door panel
To attach the door panel to the front of the appliance door,
proceed as follows:
• Fix the door panel to the front of the appliance door with the Velcro
strips supplied by fi xing the rough side (A) at the top and bottom
of the door panel to the rear of the door and the soft, felted side (B)
on the front of the appliance door in the corresponding position (1).
• Remove the short screws from the appliance door (2/C),
replace them with the long screws supplied (D)
and connect the panel fi rmly to the door by tightening the screws (3).
A
B
1
Dimensions of the door panel:
W 594 ± 1 mm × H 595 ± 1 mm
C
D
2
Installation
3
55
Werbung
