Cleaning And Maintenance - Krippl-Watches B2B-SC-1 Bedienungsanleitung

Cleaning and maintenance

NOTICE!
Risk of damage to property!
If you clean the scale improperly, you could damage
it.
- Do not use any aggressive cleaners or solvents.
- Do not use any brushes with metal or nylon
bristles, sharp or metallic cleaning utensils such
as knives, hard scrapers or similar.
- Do not put the scale in the dishwasher. It would
be destroyed as a result.
- Use a cloth moistened with water for cleaning. If necessary, you
can use a small amount of detergent or a mild soapy solution.
- After cleaning, use a soft cloth to dry the scale.
32
Changing the batteries
If you stand on the scale and "Lo" appears on the display instead of the
measurements, the batteries are no longer supplying sufficient power.
If you stand on the scale and nothing appears on the display, the
batteries are empty. To change the batteries, proceed as follows:
1. Place the scale on a soft base with the bottom facing up.
2. Open the battery compartment
3. Take the batteries out of the battery compartment.
4. Insert new batteries in the battery compartment. Use batteries of
the same type. The polarity is correct if the negative poles of the
batteries are lined up with the corresponding spring contacts in
the battery compartment.
5. Close the battery compartment.
6. Turn the scale over.
The reading "0.0" will appear on the display
7. If nothing appears on the display, remove the batteries and insert
them again.
Storage
If you do not use the scale for a prolonged period of time, please
observe the following notes:
- Take the batteries out of the battery compartment
- Do not store the scale near heat sources.
- Do not place any heavy objects on the scale if you do not use the
scale.
(see fig. B).
.
.
33