Fiamma F35PRO Montageanleitung Seite 15

product CODE
product NAME
In case of problems please contact your local dealer indicating the data on the
EN
nameplate. Consult our website for spare parts drawing.
Bei Problemen bitte den Händler kontaktieren und die auf dem Etikett aufgeführten
DE
Daten mitteilen. Auf der Homepage finden Sie die Explosionszeichnung
En cas de problème, contacter le revendeur et lui communiquer les informations reportées
FR
sur la plaquette. Consulter le site Internet pour une vue éclatée des pièces de rechange.
En caso de cualquier problema, ponerse en contacto con su distribuidor local
ES
facilitando los datos sobre la placa. Consultar el sitio web para el despiece de los
repuestos.
In caso di problemi contattare il rivenditore di zona, comunicando i dati riportati sulla
IT
targhetta. Consultare il sito web per l'esploso ricambi.
EN
Read the following instructions and warnings carefully; failure to observe these installation and usage instructions
as well as the Highway Code in the relevant country may cause severe harm or damage for which the
manufacturer declines all responsibility.
Keep the original packaging to be used in case of return.
Before installation, ensure compatibility with the vehicle on which the product must be installed. Checking that the
wall/rear door is sufficiently solid and suitable for guaranteeing the resistance of the anchoring points is always
mandatory. If this is not the case, tightness is not guaranteed and it will be necessary to reinforce it.
Before leaving, make sure the awning is correctly closed. A damaged fabric does not allow the
awning to perfectly roll in. Never use the awning with a damaged fabric.
Periodically check the fixing condition of the brackets, especially after having travelled the first kilometres from
the installation and always before and after long trips, making sure that they have not moved and that the fixing is
correct.
The awnings are produced with a high quality standard, but some characteristics of the materials (as little
imperfections on paint or linearity of aluminium profiles; minor marks or light strains of plastic parts), which could
be interpreted as defects, come from the materials and from the specific work processes, and take place even
though Fiamma uses advanced, innovative machinery and production and packaging techniques.
Apart from our strict quality controls, we also have our fabrics continuously checked by independent laboratories
to ensure that they are resistant to tear, to the pressure of water and to weather agents, and that their colours are
light-fast. To guarantee a perfect quality, the fabrics are waxed or laminated several times.
During this operation, single coloured pigments may move and thus create small bright spots in the material,
which are only irregularities that are technically unavoidable, but do not compromise the waterproofing of the
fabric.
MAINTENANCE INSTRUCTIONS
Make sure that your awning is completely dry and clean before closing it. The remaining humidity could cause
barcode
alphanumeric code
FIAMMASTORE
F35pro
180-250
F35pro
270-300
15