Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. Put the end A of Springs into the seams pointing
top rail. As PIC 6.
7. Put the end B of spring into the triangular rings
on jumping mat as per PIC 7
8. Fix the next spring at the very opposite side of
the frame and then two other adjacent springs in the
centre of the two first springs in order to distribute
the tension of the springs equally as per PIC 8.
9. Use the tool as shown above, if necessary.
Mind your hands during the assembly in order to
avoid bruises or abrasions. We recommend wear
gloves as per PIC 9.
46
( PIC 6)
( PIC 7)
( PIC 8)
( PIC 9)
Werbung
