Sony LMD-1951MD Vor Verwendung Dieses Geräts Seite 26

Specifications
Picture performance
Panel a-Si TFT Active Matrix LCD
Picture size (diagonal)
481.84 mm (19.0 inches)
Effective Picture size (H × V)
Approx. 376 × 301 mm
Resolution (H × V)
1280 × 1024 pixels (SXGA)
Aspect 5:4
Pixel efficiency 99.99%
Colors Approx. 16.7 million colors
Viewing angle (panel specification)
89°/89°/89°/89° (typical) (up/down/
Normal scan 7% over scan
Under scan 0% scan
Over scan 20% over scan
Input
Composite input (NTSC/PAL) connector
BNC type (×1)
1 Vp-p ± 3 dB sync negative
Y/C input connector
4-pin mini-DIN (×1)
Y: 1 Vp-p ± 3 dB sync negative
C: 0.286 Vp-p ± 3 dB (NTSC burst
RGB/component input connectors
BNC type (×3)
RGB: 0.7 Vp-p ± 3 dB (Sync On
Component: 0.7 Vp-p ± 3 dB (75%
External synchronized input connector
BNC type (×1)
0.3 Vp-p to 4.0 Vp-p ± bipolarity
HD15 input connector
D-sub 15-pin (×1)
R/G/B: 0.7 Vp-p, sync positive (Sync
Sync: TTL level (polarity free, H/V
Plug & Play function: corresponds to
DVI input connector
DVI-D (×1)
TMDS single link
12
GB
Specifications
7 7
(14 / × 11 / inches)
8 8
left/right contrast > 10:1)
signal level)
0.3 Vp-p ± 3 dB (PAL burst signal
level)
Green, 0.3 Vp-p sync negative)
chrominance standard color bar
signal)
ternary or negative polarity binary
On Green, 0.3 Vp-p sync negative)
separate sync)
DDC2B
Parallel remote
Modular connector 8-pin (×1)
Serial remote (LAN)
D-sub 9-pin (RS-232C) (×1)
RJ-45 modular connector
(ETHERNET) (×1)
Optional input port
2 ports
Signal format:
H: 15 kHz to 45 kHz
V: 48 Hz to 60 Hz
DC IN connector
DC5V/24V (output impedance 0.05
ohms or less)
Output
Composite output connector
BNC type (×1)
Loop-through, with 75 ohms automatic
terminal function
Y/C output connector
4-pin mini-DIN (×1)
Loop-through, with 75 ohms automatic
terminal function
RGB/component output connectors
BNC type (×3)
Loop-through, with 75 ohms automatic
terminal function
External synchronized output connector
BNC type (×1)
Loop-through, with 75 ohms automatic
terminal function
General
Power LCD monitor (LMD-1951MD)
AC 100-240 V, 50/60 Hz, 0.92 A-
0.40 A
DC IN: 24 V 3.5 A 5 V 0.030 A
(Supplied from AC adaptor)
AC Adaptor (Sony, AC-110MD)
(optional)
AC IN: 100 V-240 V, 50/60 Hz, 1.53 A-
0.58 A
DC OUT: 24 V 5.0 A 5 V 0.060 A
Power consumption
Maximum: approx. 85 W (when two
BKM-229X are installed)
Operating conditions
Temperature
0 °C to 35 °C (32 °F to 95 °F)
Humidity 30% to 85% (no condensation)
Pressure 700 hPa to 1060 hPa
Storage and transport temperature
–20 °C to +60 °C (–4 °F to +140 °F)