INOXIBAR G-SOLA Gebrauchsanweisung Seite 29

7. TROUBLE SHOOTING AND SOLUTIONS
Trouble shooting
The pressure
control valve is not
releasing any steam
Steam is coming
out from between
the cooker and
its lid
There is no pressu-
re in the cooker and
the red indicator
does not rise.
Do not try to change the pressure cooker components, or use other components or unofficial
spare parts to replace the ones supplied with your cooker. Doing so could damage your pressure
cooker or cause a serious accident.
Only use INOXIBAR official spare parts.
Possible cause
1. There is not enough liquid in the
cooker.
2. The heat source is not strong
enough.
3. The pressure control valve is
blocked.
1. The lid is not correctly closed.
2. The gasket is dirty or not in place.
3. The sealing gasket is damaged.
4. The cooker body has been dented
or damaged.
1. The lid is not closed properly.
2. The gasket is dirty or is not in
place.
3. The sealing gasket is damaged.
4. The pressure control valve is not
in place.
8. IMPORTANT WARNING
Solution
1. Add some liquid. There must
be at least 0.50 l. of water or
another liquid.
2. Turn the heat up.
3. Clean the pressure cooker
valve.
1. Put on the lid again and try
again
2. Wash the gasket and put it
back.
3. Replace the gasket
4. Stop using the cooker.
1. Put on the lid again and try
again
2. Wash the gasket and put it
back.
3. Replace the gasket
4. Turn the pressure control
valve to position 1 or 2.
29