Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Setting the current time
The weekly timer only works if you have set the current time. To set the current
time, do the following:
1.
Press the "On/Off" button. When the power symbol
press the timer button
2.
The hour flashes in the display. Press the arrow buttons
hour. Then press the gear button
display. Press the arrow buttons
gear button
to confirm.
3.
Then the day of the week flashes. Press the arrow buttons
day of the week. Then press the gear button
Setting the temperature
Press the arrow buttons
can be set between 5-50 °C. The two digits will flash for a few seconds without
any operation, then return to displaying the room temperature. If the room
temperature is lower than the set temperature of 2 °C, the heating will start
automatically. When the room temperature reaches or exceeds the set
temperature, the heater will turn off automatically.
Open window detection
This heater detects open windows. When the heater is on (whether in manual
mode or weekly timer mode), the heater will stop automatically if the detected
temperature drops 5 °C (or more) within 5 minutes.
once.
to confirm. The minutes flash on the
or
to set the minutes. Then press the
or
to set the temperature. The temperature
is lit on the display,
or
to set the
or
to set the
to confirm.
EN
23
Werbung
