Rear Panel - Omnitronic PM-3010 Bedienungsanleitung

Rear panel

1. POWER SWITCH
Press this button to start operating.
2. MASTER OUT
Output sockets (RCA and XLR) for connecting your power amplifier.
3. BOOTH
Connect your monitor system here via RCA.
4. REC OUT
Connect your recording unit here via RCA plugs.
5. SESSION
Input sockets (RCA) for connecting another dj mixer for team routines. The signals can be adjusted via the
Session In-control.
6. AUX INPUT-SOCKETS
Input sockets (RCA) for connecting your line sources like CD, MP3, MD, DAT, Tape Decks, Rhythm
Machines or Samplers.
7. MAIN LINE / PHONO INPUT-SOCKETS
Input sockets (RCA) for connecting your line sources like CD, MP3, MD, DAT, Tape Decks, Rhythm
Machines, Samplers or your turntables equipped with MM pickup cartridge or for line sources. Set the
PH/LINE switch accordingly.
8. PH/LINE-SELECTOR
Used to switch the input sockets of CH-1, CH-2 and CH-3 to Phono or Line.
9. GND (Ground terminal)
Connect the ground lead of the turntable with this terminal. This helps to reduce humming and pop noises.
10. MIC 1 INPUT-SOCKET
Connect your microphones with the ¼" jack socket.
11. MIC 2 INPUT-SOCKET
Connect your microphones with the ¼" jack socket.
23/26 10006850_V_1_0