Firmware Upgrade - Godox AD100Pro Benutzerhandbuch

Firmware Upgrade

USB connection line is not included in this product. The USB port is a Type-C USB
•
socket. Type-C USB connection line is applicable.
As the firmware upgrade needs the support of Godox G3 software, please
•
download and install the "Godox G3 firmware upgrade software" before
upgrading. Then, choose the related firmware file.
As the product needs to do firmware upgrade, please refer to instruction manual
•
of the newest electric version as final.
Maintenance
Shut down the device immediately should abnormal operation be detected.
•
Avoid sudden impacts and the product should be dedusted regularly.
•
It is normal for the flash tube to be warm when in use. Avoid continuous flashes
•
if unnecessary.
Maintenance of the flash must be performed by our authorized maintenance
•
department which can provide original accessories.
Unauthorized service will void the warranty.
•
If the product had failures or was wetted, do not use it until it is repaired by
•
professionals.
Changes made to the specifications or designed may not be reflected in this
•
manual.
It is normal if the flash is smelly in non-firing situations.
•
22