Godox AD100Pro Benutzerhandbuch Seite 15

Wireless Flash Shooting: Radio (2.4G) Transmission
AD100Pro adopts Godox 2.4G wireless X system, which has good compatibility with
other products of our company. As Receiver unit, AD100Pro is automatically compatible
with Canon/Nikon/Sony TTL system according to the master unit. Nikon cameras (use
X1T-N), Canon cameras (use X1T-C) and Sony cameras (use X1T-S) can use one or more
AD100Pro-TTL flashes simultaneously.
Wireless Settings
Press the wireless selection button to switch wireless function ON/OFF. Turn the
wireless function on, the <
triggers of other brands, please turn off the wireless function.
Setting the Communication Channel
If there are other wireless flash systems nearby, you can change the channel IDs to
prevent signal interference. The channel IDs of the master unit and the Receiver unit(s)
must be set to the same.
Long press the <GR/CH>
Button for 2 seconds, so
that the icon will be
displayed on the OLED
panel.
Setting the Communication Group
Short press the <GR/CH> button choose group ID from A to E.
> icon will be displayed on the OLED panel. When using
Turn the SET Select Dial to
choose a channel ID from 1
to 32.
15
Press the <SET> button to
confirm.