Flash Mode - Multi: Stroboscopic Flash - Godox AD100Pro Benutzerhandbuch

Flash Mode – Multi: Stroboscopic Flash
With stroboscopic flash, a rapid series of flashes is fired. It can be used to capture
multiple images of a moving subject in a single photograph. You can set the firing
frequency (number of flashes per sec. expressed as Hz), the number of flashes, and the
flash output.
Press <MODE> button so that <MULTI> is
displayed.
Set the flash frequency and flash times.
Press <SET> button to select the flash frequency. Turn the Select Dial to set the
•
number.
Press <SET> button to select the flash times. Turn the Select Dial to set the
•
number.
After finishing the setting, press <SET> button and all the settings will be
•
displayed.
Turn the Select Dial to choose a desired
flash output.
13