Wireless ID Settings
Press the MENU button to enter C.Fn-ID to choose OFF or any figure from 01-99.
Note: This can only be used when the master unit possesses the wireless ID function.
Positioning and Operation Range (Example of wireless flash shooting)
Auto flash Shooting with One Receiver Unit
•
Receiver
Use the supplied stand to position the Receiver unit.
•
Before shooting, perform a test flash and test shooting.
•
The transmission distance might be shorter depending on the conditions such as
•
positioning of Receiver units, the surrounding environment and whether
conditions.
With a lot of wireless signal interference conditions, if you miss flash, please
•
change the wireless communication channel.
Transmitter
Transmission distance is
about 100m
16