Power Management; Modeling Lamp - Godox AD100Pro Benutzerhandbuch

Power Management

ON/OFF Power Switch controls the on/off of the flash unit, turn off the power pack if the
flash unit will not be used for an extended period. The product design of power supply
with automatic power off feature. When unattended operation for a long time (approx.
30/60/90 minutes), the flash will automatically power off. Please press the power switch
< > to wake it up in off state. When the unlock icon appears, turn the select dial to
operate.
Disable Auto Power Off function is recommended when the flash is used of
camera. (C.Fn – STBY)

Modeling Lamp

1. Power on/off the modeling lamp: short press the < > to control the modeling
lamp's on or off.
2. Setting: long press the < > to enter modeling lamp setting.
Brightness setting: Turn the select dial to change the brightness value from 1 to
10 level.
Wireless Flash Mode
AD100Pro can only be set as receiver unit (receiver end). Press the menu button to
enter. C.Fn-WL to switch the radio transmission function.
Wireless Mode
OFF
ON
Flash Mode
M/Multi
TTL/M/Multi
10