Lupine Wilma Bedienungsanleitung Seite 23

6
Programming scheme
Low beam/dimming
3-level
Select by
(
superflash)
pressing the

button quickly.
PRESS
Low beam
5 % 13% 32%
dimming level dimming level dimming level
  
PRESS PRESS PRESS
4 4 Wilma
PRESS
Hold button down until
red LED comes on (approx. 8 sec.)
Then release the button
Stepless
2-level 3-level
dimming
 
PRESS PRESS PRESS
Dimming level 1
53 % 5% 13% 32 %
dimming level dimming level dimming level dimming level
 
PRESS PRESS PRESS PRESS
Dimming level 2
5 % 13 % 32%
dimming level dimming level dimming level
 
PRESS PRESS PRESS
Battery warning signal
PRESS
Hold button down until
yellow LED comes on
Then release the button
Low Middle

PRESS PRESS
53%
dimming level

red LED comes on
PRESS
yellow LED comes on
green LED comes on
bue LED comes on
53 %
dimming level

PRESS
Power management
PRESS
Hold button down until
(approx. 12 sec.) green LED comes on (approx. 16 sec.)
Then release the button
Economy Normal Power
High
14 W 16 W 19 W
  
PRESS PRESS PRESS PRESS
Select by pressing the button quickly.
5 % dimming level 1 W
13 % dimming level 2,5 W
32 % dimming level 6 W
53 % dimming level 10 W
100 %
6
SOS function
PRESS
Hold button down until
blue LED comes on (approx. 20 sec.)
Then release the button
SOS alpine
super-
emergency emergency
flash
signal signal
 
PRESS PRESS PRESS
19 W
Default setting
Wilma 45