Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Index
English
Read this manual before using
Mounting
Operation
Power Control System (PCS)
Programming scheme
Product care and storage
Troubleshooting
Technical data
Miscellaneous
26 Wilma
27
28–32
33–38
39–43
44–45
46
47
48
49
Read this manual before using
General:
The light and charger are ready for use when delivered.
before using the product.
See charger manual
Safety advisories:
Safety advisory: Avoid looking directly into the light emitted by the light or shining
the light into your own eyes or the eyes of another person. If the light accidentally shines
into your eyes, close your eyes and move your head out of the light beam path. Do not
use any strongly focussing optical device to look at the light beam.
In cases where the light is used in a public or commercial setting, users should be
provided with training concerning the safety measures for laser light.
Carry a spare light with you at all times, as the product can potentially fail unexpectedly at any time.
Heat generation:
The light housing can heat up, despite the product's passing resemblance to a flashlight. So make
sure that you always keep the light at a safe distance from any combustible or flammable materials.
However, quiescent operation (without cooling the light housing via airflow or the like) can be
carried out at any time and will not damage the product.
Important: When the light is used in a stationary state, the light dims after a few minutes to reduce
the light's temperature. The light can only be used at 19 watts for long periods if air is flowing over
the housing.
Water resistance:
All Wilma components are waterproof, which means that the product can be used under extremely
severe conditions. However, the Wilma light is NOT a diving lamp and is NOT suitable for use under
water.
All you have to do is charge the battery
Wilma
1
27
Werbung
