Dreame L10 Ultra Benutzerhandbuch Seite 18

Clean and dry mop pads after dust emptying
Afte the robot finishes a cleaning task and return to the base station to charge, the base
station will automatically start emptying the dust bin, and then clean and dry the mop
pads.
Note:
When the robot returns midway to the base station to clean mop pads, the base
•
station will not automatically empty the dust bin.
If the auto-empty function is turned off in the app, the base station will not
•
automatically empty the dust bin.
The base station will empty the dust bin according to the frequency set in the
•
app.
Clean the used water tank
After the robot has completed task, please clean the used water tank to avoid any odor.
Sweeping
1. To use only the sweeping function, select "Sweeping" in the app, or remove the
mop assembly from the robot and then the robot will automatically switch to the
sweeping mode.
Note: If the mop assembly is not removed from the robot, you can select the sweeping
mode on the app, and the robot will automatically lift the mop assembly before
sweeping.
18