Dreame L10 Ultra Benutzerhandbuch Seite 14

Add Device
Open the Dreamehome App, tap " " in the upper right corner, and scan the QR code
above again to add "DreameBot L10 Ultra". Please follow the prompts to finish the Wi-Fi
connection.
Note:
Only 2.4GHz Wi-Fi is supported.
•
Due to upgrades in the app software, the actual operations may differ from the
•
directions in this manual. Please follow the instructions based on the current app
version.
Reset Wi-Fi
Simultaneously press and hold the
"Wairing for the network configuration." Once the Wi-Fi indicator is blinking slowly, the
Wi-Fi has been successfully reset.
Note: If your robot cannot connect to the app successfully, reset the Wi-Fi and add the
device again.
and button until you hear a voice prompt say
Wi-Fi Indicator
Blinking slowly: To be
•
connected
Blinking quickly: Connecting
•
On: Connected
•
14