Herunterladen Diese Seite drucken

Vitek VT-1602 G Die Betriebsanweisung Seite 7

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 8
ENGLISH
CLEANING AND CARE
Always switch the unit off and unplug it after
operation or before cleaning.
Disassemble and clean the slow juicer after
every usage:
Remove the pusher (11) from the feeding
chute (10).
Turn the lid (8) counterclockwise and remove
it from the bowl (4).
Remove the bowl (4) from the motor unit (1).
Remove the screw (7), then the mesh filter (6)
and the separator (5) from the bowl.
To clean the pulp outlet channel completely
remove the silicone gasket (14) from the bot-
tom of the bowl (4) base.
It is recommended to wash all removable
parts in warm water with neutral detergent
right after unit operation.
It is more convenient to wash the mesh filter
(6) from the outside using a small brush.
Do not wash the mesh filter (6) and other
removable parts in the dishwasher.
Clean the motor unit (1) with a slightly damp
cloth, and then wipe it dry. Do not immerse
the motor unit (1) in water or any other liq-
uids; do not wash it under water jet.
Do not use coarse sponges, abrasives and
solvents to clean the slow juicer.
Some products, for example, carrots or
beets, can dye the juicer's removable parts,
you can use dry cloth dampened in vegetable
oil for removing stains; after cleaning of parts
wash them with warm water and a neutral
detergent, then dry.
VT-1602.indd 6
STORAGE
Before putting the unit away for storage,
make sure it is unplugged.
Follow the requirements of the «CLEANING
AND CARE» section.
Keep the unit away from children in a dry cool
place.
DELIVERY SET
Slow juicer – 1 pc.
Pusher – 1 pc.
Juice cup – 1 pc.
Pulp container – 1 pc.
TECHNICAL SPECIFICTAIONS
Power supply: 220-240 V ~ 50/60Hz
Maximal power: 150 W
The manufacturer preserves the right to
change the specifications of the unit without a
preliminary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the
Council Directive 89/336/EEC and to
the Low Voltage Regulation (73/23 EEC)
6
19.10.2012 12:32:50

Werbung

loading