What To Do If - IKEA RUTINERAD Anleitung

ENGLISH
5
Release the locking
system to remove
the glass panels.
7
2
1
Carefully lift (step 1)
and remove (step 2)
the glass panels
one by one. Start
from the top panel.

What to do if...

Warning! Refer to the Safety chapters.
Problem
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
6
90°
Turn the two fasten-
ers by 90° and re-
move them from
their seats.
Possible cause
The appliance is deactiva-
ted.
The clock is not set.
The necessary settings are
not set.
The automatic switch-off is
on.
Clean the glass panels with water and
soap. Dry the glass panels carefully.
Installing the door and the glass panels
When the cleaning is completed, install the
glass panels and the oven door. Do the
above steps in the opposite sequence.
Make sure that you put the glass panels
back in the correct sequence. The second
panel has a decorative frame. The screen-
printing zone must face the inner side of the
door. Make sure that after the installation
the surface of the glass panel frame on the
screen-printing zones is not rough when you
touch it.
Make sure that you install the top panel in
the seats correctly (refer to the illustration).
Activate the appliance.
Set the clock. Refer to "Set-
ting the time of day".
Make sure that the settings
are correct.
Refer to "Automatic switch-
off".
16
Remedy