Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Close the inner fitting
Beware
The system will not function if the flat ribbon cable is
damaged. It also cannot be excluded that this could cause
damage to the system or that the batteries could be
prematurely drained.
When putting the housing back on do not trap the ribbon
cable. Place the ribbon cable correctly.
If the ribbon cable is trapped, dismantle the decorative
housing and check the ribbon cable for damage. Do not put
the system into operation if the ribbon cable is damaged.
Note
Take care that you do not scratch the door handle when you remove and put back the decorative
housing. Possibly use a cable protective tube when dismounting and reassembling the decorative
housing.
Guide the decorative housing over the door handle and the inner fitting.
Secure the decorative housing with the 2 screws.
Changing the batteries is now complete and the security fitting is ready for operation again.
5.3 Guidelines for disposal
Batteries should be disposed of either at commercial battery suppliers or at official collection
centres that have appropriate containers.
D00445
08
All manuals and user guides at all-guides.com
Care and maintenance
Seite 71
Werbung
