Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.7 Cancelling a user finger
2.7.1 To cancel a user finger
Notice
You always cancel the programmed user finger and also the programmed substitute finger in one
operation. When you do this, it does not matter whether you use the user finger or the substitute user
finger to cancel.
1. Start the programming:
beep
2. Read in the user finger to be cancelled:
beep
flashes 4x
The user finger is cancelled.
Caution
If not cancelled properly there will be a security leak. Access by unauthorised persons is possible!
Check that the user finger can really no longer be used to activate the fitting.
If the fitting can still be activate with the user finger, an error has occurred in the cancellation operation.
Read through the described sequence once more, and then run the cancellation process again.
D00445
08
All manuals and user guides at all-guides.com
Draw the cancel finger over the sensor.
You will hear an audible signal.
flashes.
flashes
Draw user finger to be cancelled over the sensor
You will hear an audible signal.
flashes 4 times.
Programming instructions
Seite 57
Werbung
