Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10
millnorway.com
Activating WiFi
See figure 8 on separate illustration sheet
Press «add heater» on the home screen in the Mill-app. Follow the instructions in the app.
Delete WiFi setting
A
See figure 9 on separate illustration sheet
B
Press and hold WiFi button for 5 seconds.
For models PA500LWIFI3M, GL500LWIFI3M, PA900WIFI3MP, GL900WIFI3MP
please follow the steps below to delete WiFi settings:
Press
○
Press
○
option by pressing
Maintenance
1.
For cleaning, always unplug the heater and leave it to cool.
2.
Wipe the heater regularly with a damp cloth and dry the surface before turning on the
heater again.
3.
The heater must be cleaned at least once a month during the he ating season.
CAUTION! The heater should never be immersed in water.
Avoid using detergents to clean the heater.
Never let any water get inside the heater; this can be hazardous.
4.
Dust etc. should be removed with a soft cloth.
5.
The heater can be stored in a dry and clean place.
6.
If the heater stops working, do not attempt to repair it yourself because it can cause a
fire hazard and/or electric shock.
Warranty
Mill offers consumers 5 years warranty for any Mill product from date of purchase by a
consumer. For business customers, a warranty period of 2 years will apply (applicable in
case the end-users are businesses).
This warranty provides the customer with a right to, at Mill's reasonable discretion, either
repair, replacement of a defected product, or alternatively a refund.
The warranty only covers defects that originates from Mill. The customer will therefore not
have a valid warranty claim if the defect is a result of circumstances such as the following::
• Negligent use, misuse, neglect, or careless operation of the product not in accord-
ance with the Mill user manual.
• Defects caused by transport incurred outside Mill's responsibility.
• Normal wear and tear, including parts that might wear out over time as for example
batteries for remote controls (if applicable), filters, tubes, and lamps for outdoor
heating etc.
• Damage because of use not in accordance with the rated power and Hz.
to enter menu. Use + and - button to navigate the menu until you see "Sr" in the display.
to enter "Soft Reset". Press + or - button to choose between "YES" or "NO". Select
. The heater will now reset your WiFi settings.
○
Werbung
