Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Share your house with other family members, making control easy
•
If internet is down the heater will follow its weekly program which is stored on the
heater. One can easily turn off the WiFi on the heaters and control them manually, so
that the heaters keep an even temperature throughout the whole day and night.
•
+ many other things
To download the app search for "MillNorway" in Appstore or Google Play and
install the app on your device.
Before use:
Be aware that the Mill-app must be installed before you can connect your
heaters to your WiFi network. You can then simply follow the instructions given in the app
when connecting your heaters. The heaters will connect directly to your router via WiFi
with 2,4 Ghz mode b/g/n. Bluetooth is needed for provisioning, so make sure its enabled.
Minimum OS requirement: iOS 8.0 and Android 5.0
Go to our help desk at millnorway.com for more information or if you have any questions
regarding the Mill-app, connecting to WiFi or other relating questions.
ATTENTION!
The heaters will be connected directly to your WiFi router and it is therefore
important to make sure the router has sufficient capacity for the number of active devic-
es connected at the same time.
Color codes (WiFi control light)
The heater has not been connected to WiFi. The heater keeps an even temperature
throughout the whole day and night.
The heater is online in the Mill cloud
When installing/connecting the Mill-app and cloud, the light will flash in various
speed. This is normal.
The heater has a problem connecting to or finding the WiFi signal. Please do the
following:
1. Please turn the heater OFF and ON again
2. Please restart the WiFi router
3. Please check the WiFI router to make sure the capacity is sufficient for the number
of active devices connected at the same time
4. Please make sure 2,4 Ghz is activated. If the problem persists please get in touch
with support.
The heaters are offline and have no contact with the Mill cloud
9
Werbung
