Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8
millnorway.com
Usage without WiFi connection
Set desired temperature without WiFi connection
See figure 7 on separate illustration sheet
Press the arrow buttons to set the desired temperature. The heater keeps an even temper-
ature the whole day and night.
Child lock
You can enable/disable child lock from the app. But in addition, you can also enable/disa-
ble child lock from the heater itself. Turn off the heater using the main power switch. Turn
the heater back on, within 5 seconds press the and hold ○. After 3 seconds the display
will show "CHL", once you see "CHL " release
lock.
For models PA500LWIFI3M, GL500LWIFI3M, PA900WIFI3MP, GL900WIFI3MP
please follow the steps below to activate child lock:
○
Press
the display. Press
Lock" is activated. To unlock, quickly press
and "Child Lock" will be disabled.
Commercial Lock
You can enable and disable commercial lock from inside the app. But in addition, you can
enable/disable commercial lock from the heater itself. Turn off the heater using the main
power switch. Turn the heater back on, within 5 seconds press the and hold ○. After
10 seconds the display will show "COL ", once you see "COL" release
enables/disables commercial lock.
For models PA500LWIFI3M, GL500LWIFI3M, PA900WIFI3MP, GL900WIFI3MP you
can only enable "Commercial Lock" from inside the app once the device is connect-
ed. Please follow in-app instructions to enable/disable "Commercial Lock".
Usage with WiFi connection
A free app is available for downloading for iOS and Android.
By connecting your heaters with the iOS/Android device you can do the following:
•
Control all your heaters situated in multiple locations. Everything is controlled with the
Mill-app (with same user)
•
Set up weekly programs (or use the standard program already available in the app) by
using the 4 modes: Comfort, Sleep, Away and OFF
•
Set individual temperature for different modes in each room
•
Override the set programs for the whole house, a specific room or a specific heater.
There is no need to edit your program if you get home earlier than normal one day
Enable vacation mode for saving energy while you are away. The app will automatical-
ly increase the temperature in your house before you get back home
to enter menu. Use + and - button to navigate the menu until you see "ChL " in
○
to enable "Child Lock". "ChL" will blink on the display twice and "Child
○
and the heater enables/disables child
○
5 times. "NoL" will appear on the display
○
and the heater
Werbung
