Stiga AB 500 Li 48 Gebrauchsanweisung Seite 14

2. SAFETY REGULATIONS
2.1 TRAINING
Become familiar with the
controls and the proper use
of the machine. Learn how
to stop the machine quickly.
Failure to follow the warnings
and instructions may result
in fire and/or serious injury.
• Never allow children,
with reduced physical, sensory
or mental capabilities or lack of
experience and knowledge or
persons unfamiliar with these
instructions to use the machine.
Local regulations may restrict
the age of the operator.
• Never use the machine if the
user is tired or unwell, or has
taken medicine, drugs, alcohol
or any substances which
may slow their reflexes and
compromise their judgement.
• Bear in mind that the operator
or user is responsible for
accidents or unexpected
events occurring to other
people or their property. It is the
user's responsibility to assess
the potential risk of the area
where work is to be carried out
and to take all the necessary
precautions to ensure his
own safety and that of others,
particularly on slopes or rough,
slippery and unstable ground.
• If the machine is sold or
lent to others, make sure
that the operator looks
over the user instructions
contained in this manual.
All manuals and user guides at all-guides.com
persons
2.2 PREPARATION
Personal Protective
Equipment (PPE)
• Wear suitable clothing,
strong work shoes with anti-
slip soles, and long pants.
Do not operate the machine
barefoot or wearing open
sandals. Wear ear-protection
devices, anti-vibration gloves,
protective goggles, and
a half mask respirator.
• Use of hearing protections can
reduce the ability to hear any
warnings (shouting or alarms).
Be careful of what occurs
around you in the work area.
• Never wear scarves, shirts,
necklaces, bracelets, loose
flowing clothing, laces or ties
or any hanging or flapping
accessory that could catch in
the machine or in any objects
or materials in the work area.
• Keep hair away from the
air intake grille, as it could
get tangled in the rotor and
cause serious injuries. Tie
your hair back if it is long.
Work area / Machine
• Thoroughly inspect the
whole work area and use
a rake or yard brush to
manually untangle debris,
remove anything that could
be projected by the machine
(when used as a blower), block
the vacuum tube (when the
machine is used as vacuum
collector), or be a source of
hazard (stones, branches,
steel wire, bones etc.).
EN - 2