Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Sync-FO-Multiplexer
Ordering Information
Item
Sync-FO-Multiplexer
Auxiliary voltage
Maintenance, Repair and Cleaning
The devices 7KE6000 do not require special maintenance. If necessary, they can be
checked in a laboratory.
Repair of defective modules is never recommended because specially selected electronic
components are used which must be handled in accordance with the procedures required
by Electrostatically Endangered Components (EEC).
Therefore, if a device defect is suspected, it is recommended that the complete device be
returned to the manufacturer. Use the original transport packaging or an appropriate
packaging for return.
If it is unavoidable to replace individual modules, it is imperative that the standards related
to the handling of Electrostatically Endangered Components are observed.
Warning
When carrying out changes on site, the instructions for handling electro-
statically endangered components must be observed (EEC).
The device should be mounted in a dry, dirt free location. Once installed, it is not necessary
to clean the device. To operate properly and effectively, environmental conditions should fall
within the guidelines listed in the Technical Data, page 33.
If necessary, the device can be switched off and wiped with a clean, dry and soft cloth. Do
not use solvents.
n
E50417-K1074-C295-A1
Order number
7KE
6
0
DC 24 ... 60 V
DC 110 ... 250 V
AC 100 ... 230; 45 ... 65 Hz
0
0
–
8
A
¦
H
J
English
Short form
37
Werbung
