Philips HD5416 Benutzerhandbuch Seite 6

Warning: During brewing and keeping warm, the water tank, filter holder, the hotplate, and
the glass jug filled with coffee are hot.
12 Let the appliance run until the water tank is empty (Fig. 9).
Note: After brewing, small amount of water may remain in the water tank. This is normal and
safe on our food grade stainless steel plate.
13 Remove the glass jug when the brewing is completed (Fig. 16).
14 Pour the coffee into a cup (Fig. 17).
Note: 40 minutes after keeping warm for the coffee, the appliance switches off automatically for
extra safety and to save energy.
Tip: If you want your coffee to stay hot longer, pour it into an insulated jug.
Drip stop function
The drip stop function enables you to remove the jug from the coffeemaker before the brewing
process is finished. When you remove the jug, the drip stop function stops the flow of coffee into the
jug.
Note: The brewing process does not stop when you remove the jug. If you do not put the jug
back into the appliance within 20 seconds, the filter overflows.
Cleaning
Caution: Always unplug the appliance before you start to clean it.
Caution: Never immerse the appliance in water.
Caution: Always clean the appliance after the appliance cools down.
Caution: Jug lid is not detachable.
1
Clean the outside of the coffeemaker with a moist cloth (Fig. 18).
2
Clean the inner filter, the coffee jug in hot water with some washing-up liquid.
3
Wipe the water tank with a clean and soft cloth after the appliance cools down.
Caution: Regular descaling keeps the inside of the water tank clean.
Descaling
Descale the coffeemaker when you notice excessive steaming or when the brewing time increases. It
is advisable to descale the coffeemaker every two months. Only use white vinegar to descale, as other
products may cause damage to the appliance.
Warning: Never use vinegar with an acetic acid content of 8 % or more, natural vinegar,
powder descalers or tablet descalers to descale the appliance, as this may cause damage.
1
Fill the water tank up to MAX indication with white vinegar (4 % acetic acid) (Fig. 19).
2
Open the filter (Fig. 11).
3
Take a paper filter (type 1x4 or no. 4) and fold the sealed edges to prevent tearing and folding
(Fig. 12).
4
Put the paper filter in the filter (Fig. 13).
5
Put the plug into the wall outlet (Fig. 7).
6
Press the on/off button to switch on the appliance, the light in the on/off button lights up (Fig. 8).
Warning: During brewing and until you switch off the appliance, the water tank, filter holder,
the hotplate, and the glass jug filled with vinegar are hot.
7
Let the appliance run until the water tank is empty (Fig. 9).
Note: After brewing, small amount of liquid may remain in the water tank. This is normal and
safe on our food grade stainless steel plate.
8
Empty the glass jug and remove the paper filter with the scale residues (Fig. 20).
English
7