Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Rack Mounting and Dimensions
Use four screws and washers to mount the amplifier to the equipment rack rails. To use the amplifier outside a rack, attach the self-adhesive rubber
feet to the bottom.
For portable, mobile, or other applications where the rack assembly may be moved, we strongly recommend supporting the rear of the amplifier. A
rear rack ear kit is available from QSC's Technical Services Group.
Optional rack handles provide finger grips at each end, making lifting and setting into the rack more comfortable.
EN
ES
FR
DE
15.63" (39.7 cm)
CH
AC Mains Current Draw
This table provides typical current draw for each model as a function of load and output power level. Units of measurement are amperes rms.
NOTE! Current draw shown is for 120 VAC line. For 230 VAC models, multiply values shown by 0.5.
•1/8 power (pink noise) represents typical program with occasional clipping. Use this rating for most applications.
•1/3 power (pink noise) represents severe program with heavy clipping.
•Full power (sine) is continuous sine wave driven at 1% clipping.
Model
Load
PL325
8 ohms x 2
4 ohms x 2
2 ohms x 2
PL340
8 ohms x 2
4 ohms x 2
2 ohms x 2
PL380
8 ohms x 2
4 ohms x 2
2 ohms x 2
* Burst mode only. Protective limiting will reduce long-term AC current
10
17.30" (44.0 cm)
3.50" (8.9 cm)
Idle
1/8 Power
Current
Pink
BTU
(Amperes)
Noise
1.0
5.2 A
792
8.5 A
1387
12.6 A
2178
1.0
7.5 A
1150
11.8 A
2114
19.1 A
3495
2.8
8.7 A
918
13.1 A
1355
19.3 A
1768
1/3 Power
Full Power
Pink
BTU
Sine
Noise
Wave
8.6 A
893
17.0 A
14.3 A
1981
28.3 A
22.0 A
3339
45.3 A
13.3 A
1682
25.9 A
21.1 A
2864
43.5* A
31.6* A
5306*
68.6* A
16.0 A
1101
38.3 A
26.2 A
1674
70* A
41.6* A
3278*
100* A
BTU
1204
2481
4942
2082
4253*
8601*
1853
3000*
6000*
Werbung
