Set-Up; Dishwasher Parameter Modification Procedure - AFG GSM620-G Handbuch

AfG

Set-up

During first start-up, the functions/parameters listed below must be set or adjusted:

6.1 Dishwasher parameter modification procedure:

Only accessible after filling is complete or with the hood open.
Access "programming mode" by pressing the
a few seconds with the appliance on with the hood open
and the tank empty (after the filling and heating phases).
The display shows UnLo1:58; when the beep sounds,
release the button and press it again at once. Keep
pressing the button again to scroll through all the
modifiable parameters in the following order:
Rinsing temperature (boiler temperature)
Washing temperature (tank temperature)
Quantity of rinse aid dispensed, OPT, only if installed (the
number indicates the number of seconds for which the
peristaltic pump is operated)
6 SET-UP
GSM620-G
button for
10