Stop Button - Handicare Freecurve Classic Benutzerhandbuch

2
1
C A U S E
Problem: the lift does not travel in either direction, the LED[1] flashes when the
joystick is operated and the stop button [2] is illuminated.
Cause: the stop button has been pressed.
Solution: press the stop button once.
1
2
C A U S E
Problem: the lift does not travel in either direction, the LED[1] flashes when the
joystick is operated and the emergency stop [2] is pressed.
Cause: the stop button has been pressed.
Solution: the emergency stop can be released by turning the emergency button.
OPTIONAL STOP BUTTON

STOP BUTTON

S O L U T I O N
1
S O L U T I O N
1
USER MANUAL | 21
EN